| 1.
|
Discuss basic designs and principles that enable the construction of
tomographic images using Single Photon Emission Computed Tomography
(SPECT), Positron Emission Tomography (PET), and/or Positron
Coincidence Detection (PCD) imaging systems. (I)
|
| 2.
|
Compare and contrast acquisition parameters of selected types of
imaging including SPECT, PET, and planar imaging. (I)
|
| 3.
|
Give a step-by-step explanation of the back projection method of
reconstruction, taking into consideration various correction
parameters. (I)
|
| 4.
|
Describe iterative reconstruction. (I)
|
| 5.
|
Discuss the use of multiple pinhole or slant pinhole collimators in
the production of tomographic images. (I)
|
| 6.
|
Discuss the selection criteria related to the open frame and axial
collimators used in PCD imaging.
|
| 7.
|
Describe the 511 keV collimators used on SPECT systems to acquire
images using positron-emitting radionuclides. (I)
|
| 8.
|
Describe the components of PET and PCD systems. (I)
|
| 9.
|
List conditions or pathologies for which tomographic imaging
procedures are advantageous over planar imaging. (I)
|
| 10.
|
State radiopharmaceutical requirements that must be satisfied in order
to perform a PET or PCD studies. (I)
|
| 11.
|
Discuss the activity limitations related to open frame and axial
collimators. (I)
|
| 12.
|
Describe the factors the must be considered when selecting a filter.
(I)
|
| 13.
|
Describe how annihilation allows for PET and PCD imaging. (I)
|
| 14.
|
Compare the sensitivity, resolution, and signal-to-noise ratio for the
three methods of imaging with 511 keV photons. (I)
|
| 15.
|
List the studies that can be performed satisfactorily using each
method of imaging. (I)
|
| 16.
|
Discuss the physical and chemical characteristics of positron emitters
that make them appropriate for nuclear medicine procedures. (II)
|
| 17.
|
Describe the methods and radiation protection procedures necessary for
preparing and administering positron emitters. (II)
|
| 18.
|
Describe the allowable dose ranges and calibration requirements
according the NRC regulations. (III)
|
| 19.
|
Calculate specific dose concentration and volume for pediatric and
adult patients. (III)
|
| 20.
|
Use decay formulas and decay factor tables to account for radioactive
decay. (III)
|
| 21.
|
Discuss the different methods used to calculate pediatric dosages, the
advantages and disadvantages of each method including the importance
of utilizing minimum and maximum dose limits. (III)
|
|