1.
|
Use safe work habits. (I)
|
2.
|
Select and operate precision measuring equipment including rules,
calipers, micrometers, gage blocks, etc. (II)
|
3.
|
Apply cutting tools geometry and materials, and basic sharpening
principles, and sharpen drills and lathe tool bits. (VI, IX)
|
4.
|
Identify parts and safely perform basic operations and set-ups on an
engine lathe. (III, IX)
|
5.
|
Use and apply basic speeds and feeds rules and formulas. (IX, X, XI)
|
6.
|
Identify and safely perform set-up and operations on the vertical and
horizontal milling machines. (IV, X, XI)
|
7.
|
Identify and safely perform principles and applications of drilling
and boring machines. (V, XII)
|
8.
|
Identify and safely perform operations and set-up on the cylindrical
and surface grinder. (VI, XIV)
|
9.
|
Identify basic principles, and application of cuttoff and sawing
machines. (VII, XIII)
|
10.
|
Identify and perform basic operations of specific shop equipment
including hand tools, belt sanding, arbor press, indexing devices,
etc. (VIII)
|
|
|
---|
I. Introduction and Safety
II. Semi and Precision Measurement
III. Lathe and Single Point Cutting Tools
IV. Vertical and Horizontal Mill Machines and Cutting Tools
V. Drilling and Boring Machines and Tools
VI. Grinding Machines
VII. Sawing Machines
VIII. Hand Tool and Fasteners
IX. Lathe
A. Speeds and feeds, sharpening tools for the lathe
C. Drilling, boring, reaming on the lathe
E. Threading on the lathe
F. Taper turning on the lathe
G. Steady and follower rests
X. Vertical Mill
A. General safety, parts and operation
B. Set-up, cutters, and speeds and fees
XI. Horizontal Mill
A. General safety, parts and operation
B. Set-up, cutters, and speeds and feeds
XII. Drilling Machines
A. General safety, parts and operation
B. Drill types, hand sharpening, speeds and feeds
XIII. Sawing Machines
A. General safety, parts and operations
B. Blade typed, selection, and blade welding
XIV. Grinding
A. General safety, types of grinders and operation, grinding
wheel selection
B. Using the surface grinder
C. Using the cylindrical grinder
|